Work Hours
Mon ~ Fri: 10:30 am - 6:30 pm
Sat: 10:30 am - 3:00 pm
Sundays, Holidays (Closed)
SOLD OUT
Camera Base Layer
₱4,800.00
The Camera Base Layer keeps compact DSLR and mirrorless cameras fully protected and accessible during travel and outdoor pursuits.
- Waterproof (IPX6 rated)
- Customized fit
- Versatile carry options
- Contains materials that meet Bluesign® criteria + PFC free
Out of stock
Camera Base Layer
Waterproof, Versatile, Lightweight
FAST ACCESS + FULL WATERPROOF MODES
Integrated drybag lines the Camera Base Layer. Leave liner unrolled for fast access, or use the drybag snaps to roll and close drybag for rated waterproof protection. Insulative padding protects from bumps and maintains temps.
INSTANT, ONE-HANDED ACCESS
Fast, magnetic latch can be operated with one hand without looking for instant access.
ADDITIONAL ON-BOARD STORAGE
On board zipper pocket on back for lens caps, camera cards, or hand warmers (for maintaining battery function in cold).
PRODUCT DETAILS
- Integrated drybag with fast access and full waterproof modes
- Magnetic latch for instant, one handed access
- Adjustable length for varying camera/lens combinations
- Top carry handle with integrated daisy chain
- Anodized aluminum carabiner
- Compatible with traditional camera straps
- Zipper pocket for lens caps, camera cards, or hand warmers (for maintaining battery function in cold)
- Insulative synthetic padding protects from bumps and maintains temps
- Hypalon™ reinforced anchor points and handle
TIPS AND INSTRUCTIONS
How to measure for a great fit
To ensure a good fit in both waterproof and fast-access modes, we suggest you measure your camera before purchase. Simplily measure from the back of the body to the end of the lens for length and across the body for width.
Please note:
The Camera Base Layer does not fit battery grips.
Ideal Max Setup
Sony A7RIII + 24x70 f/2.8 (8.5 x 5.25 x 3.75 inches)
Two ways to adjust for a perfect fit
Macro Adjust
Tuck the bottom of the case up inside itself and cinch the drawstring to convert to short mode.
Micro Adjust
Adjust the magnetic buckle up or down for a snugger/looser fit.
FAQs
Is the Camera Base Layer waterproof?
Yes. The Camera Base Layer is constructed with a drybag liner that can be rolled 3 plus times and clipped with the integrated snaps. For fast access that is less waterproof, leave the drybag liner top open.
Will the Camera Base Layer fit with a battery grip?
No, the Camera Base Layer does not accomodate camera bodies with a battery grip accessory installed.
TESTED MODELS/LENS
- Sony A7RIII + 24x70 f/2.8
- Nikon Z6 III + kit lens (All Nikon mirrorless bodies)
- Olympus OM-D Mark IV + Kit lens
- Sony A6100 + Kit
- Fuji XT4 + Kit Lens
- Sony a6 + Kit lens (Smallest recommended size)
- Nikon D780 + Kit Lens
Does not fit
- Canon r6 + 600mm + anything larger
- Nikon z6 III+ 70-200 + anything larger
- Canon 5d mark IV + Kit Lens
- Nikon D850 + Kit
- All larger Canons
Not recommended
- Canon R6 + 28-70mm F/2 (Only rolls twice in dry bag)
Specifications
DIMENSIONS
27.9 H x 22.8 W x 2 D cm
VOLUME
2.25 liters
WEIGHT
155 g
MATERIALS
- 420D PU coated nylon, DWR coating (PFC free)
- 40D exterior panels, DWR
- 50D ripstop, UTS sealed seams
- Hypalon™ rolltop bag liner
- 210D nylon thread
- Magnetic Fidlock® latch
COATING SPECIFICATIONS
- UTS coating (ultra tear strength): waterproofing and tear strength increase of 30%
- PU coating (polyurethane): durable waterproofing
- DWR coating (durable water repellent): water beads up and slicks off
WHAT IS IN THE BOX
1 x Matador Camera Base Layer
Add a review
Camera Base Layer
Your review
* Review is required
Name
* Name is required
Email
* Email is required
Add photos or video to your review
* Please confirm that you are not a robot
Q & A
Ask a question
There are no questions yet
Reviews
There are no reviews yet